Sofamel SYNCRO Mode D'emploi page 19

If the device detects that the battery voltage is below
the safety threshold during the test, it will become
inoperative and shut down. In this case, the battery must
be replaced (see battery replacement).
Once synchronised, the detector shall remain in alert
status for a period of 90 seconds before switching off
automatically.
CONCORDANCE / DISCORDANCE
VERIFICATION
1. Use the universal head (3) to attach the TX and RX to
the tip of an insulating pole suitable for the range of
voltages and distances.
2. Follow the instructions of the self-verification and
synchronisation test
3. Check that the green LED (7) remains on and the blue
LED (10) is flashing to indicate correct communication.
4. Place the electrode (1) of the TX in contact with the
electrical conductor that we want to use as a reference.
19