Uline H-11275 Mode D'emploi page 2

WALL MOUNT ATTACHMENT
1. Place bracket at desired location. Using bracket
as a template, mark four locations to drill into wall.
(See Figure 4)
NOTE: If using optional wall spacer for angled
display, only mark top two holes.
Figure 4
2. Drill holes at previously marked locations.
3. Attach bracket to wall using long screws
and anchors. (See Figure 5-6)
Figure 5
Long Screw
PAGE 2 OF 6
ASSEMBLY CONTINUED
Anchor
1-800-295-5510
uline.com
IMPORTANT! If using optional wall spacer,
attach to bottom back of bracket before
mounting to wall. (See Figure 6)
Figure 6
Long Screw
WITH WALL SPACER
4. Add end caps and insert pockets into slots at top
and bottom of bracket. (See Figure 7)
Figure 7
Anchor
Wall Spacer
(Optional)
0224 IH-11275