Keurig HOT PLUS Série Guide D'utilisation Et D'entretien page 28

CARING FOR YOUR BREWER
CLEANING THE BREWER
ENTRANCE NEEDLE
Having trouble brewing? You may have
coffee grounds stuck in the brewer's
Entrance Needle. Use your Brewer
Maintenance Accessory and get back
to brewing in a few quick steps!
NOTE: The Brewer Maintenance Accessory comes with the brewer.
It is an orange tool.
2. Lift Handle, properly place Brewer
Maintenance Accessory in Pod Holder
with printed arrows pointing down.
Warning: Avoid sharp needles.
1. Please ensure the brewer is powered off.
With the printed text on your Brewer
Maintenance Accessory facing up, fill
silicon bulb with water.
3. Raise and lower the Handle five times
to loosen and remove any coffee
grounds retained in your brewer's
Entrance Needle.
28
x