Publicité
Les langues disponibles
Les langues disponibles
5.
Separate the Pod Holder from
the Housing.
8.
After all pieces are cleaned, reassemble
the Pod Holder Assembly by inserting the
Pod Holder back into the Housing.
6.
Clean the Pod Holder (1), Housing (2),
and Base (3) with a damp, soapy,
lint-free, non-abrasive cloth and
rinse thoroughly.
8.
Place the Base, then the Pod Holder
Assembly into the Brew Head.
Lower the Handle.
CAUTION: Sharp needles. Do not put fingers in chamber.
27
2 | TIPS & MAINTENANCE
Publicité
Chapitres
Dépannage
