Thank you for choosing our child car seat. If you need help with this product,
please contact our customer service.
HOW TO USE
• This product is suitable for children between 100 and 150cm in height.
• Forward-facing installation for children between 100 to 150 cm in height
made possible thanks to the Isofi x connectors. The child is strapped in
with the car's 3-point seat belt. Alternatively, the child car seat in the
100-150 cm size class can also be fi tted using the 3-point seat belt only.
Connection with the Isofi x connectors is not mandatory, but it is recom-
mended.
NOTE
This is an optimised i-Size children's booster seat. It is approved under Regu-
lation No. 129 for use primarily on "i-Size vehicle seats" as specifi ed by vehicle
manufacturers in the vehicle manual.
If in doubt, the manufacturer of the enhanced child restraint system or the
retailer should be consulted.
IMPORTANT - DO NOT USE THE CHILD CAR SEAT IN THE DIRECTION OF TRAV-
EL UNTIL THE CHILD HAS REACHED THE AGE OF 3.
The following table provides information about the fastening devices and
methods:
Height
Installation
range
direction
100–150
Forward-
cm
facing
100–150
Forward-
cm
facing
- 9 -
- 9 -
1 & 2): When used with Isofi x: This
only applies if Isofi x connectors are
available and the seat is recognised
as i-Size-compatible in the vehicle
manual.
Installation
Isofi x connectors
& 3-point car seat
belt
3-point car seat
belt
Child safety
Type
device
i-Size
3-point car
booster
seat belt
seat
i-Size
3-point car
booster
seat belt
seat
EN