osann Komet Isofix Mode D'emploi page 10

Les langues disponibles

WARNING

• Please read through these instructions carefully before use in order to

guarantee the safety of your child. Retain the instructions. Non-compli-

ance with the instructions in this manual may result in serious injuries to

your child.

• For Isoﬁ x installation: Be sure to read the car manufacturer's manual.

• Do not use load-bearing contact points other than those described in the

instructions and indicated on the child restraint system.

• Do not use this child car seat at home. It has been designed exclusively for

use in a car.

• Do not leave your child unsupervised in the seat at any time.

• The child seat must be replaced if it has been subject to severe mechanical

stress in an accident.

• For safety reasons, the child car seat must be secured in the vehicle even

when there is no child sitting in the child car seat.

• Always make sure that all straps that attach the child car seat to the ve-

hicle are secure and that all belts that restrain the child are adjusted to ﬁ t

the child's body. Ensure that the belts are not twisted.

• Items of luggage and other objects that could cause injury in the event of a

collision must be properly secured.

• The rigid elements and plastic parts of a child restraint system must be

positioned and installed so that they cannot become jammed by a movable

seat or a vehicle door.

• It is important that belts that sit low hold the child's pelvis ﬁ rmly in place.

Your child should always be fastened in to stop them falling out.

• It is dangerous to make changes or additions to the product without ap-

proval from the responsible authority. Non-compliance with the installa-

tion instructions provided by the manufacturer of the child restraint sys-

tem may also present risks to the safety of your child.

• This child seat is designed for children with a maximum height of 150 cm.

Never overload the child seat by transporting more than one child or ad-

ditional loads in it.

• The child restraint system must not be used without the seat cover.

• The seat cover must not be replaced by a cover other than that recom-

mended by the manufacturer, as this seat cover is an important compo-

nent of the restraint system.

- 10 -