Publicité
Les langues disponibles
Les langues disponibles
7
Extra information
WATER HARDNESS LEVEL SETTINGS (SALT CONSUMPTION)
Level
German hardness
[dH]
1
0-5
2
6-11
3
12-17
4
18-22
5
23-31
6
32-50
RINSE AID CONSUMPTION SETTINGS
Level
Number of rinse aid doses that is dispensed
1
Rinse aid not dispensed
2
1 dose
3
2 doses
4
3 doses
5
4 doses
8
Troubleshooting
GENERAL TROUBLESHOOTING PROCEDURE
1. Try to find a solution for the problem with the help of the troubleshooting table and the fault codes.
2. If you cannot find a solution for the problem, reset the appliance. Refer to section
3. If the fault code keeps re-occuring, contact the Inventum-servicedienst.
TROUBLESHOOTING TABLE
Problem
The program does not start.
A function indicator is on and the
display goes on and off.
The ready indicator does not go off
when a program is finished.
46
•
English
French hardness
[dF]
0-9
10-20
21-30
31-40
41-55
56-90
Possible cause
The mains plug is not connected.
There is a problem with the fuse.
There is no water supply.
The door of the appliance is open.
The appliance is switched off.
The water inlet hose and filters are
clogged.
The door is open.
The on/off button is pushed.
British hardness [dE]
Display indicator
0-6
L1
7-14
L2
15-21
L3
22-28
L4
29-39
L5
40-63
L6
Display indicator
r1
r2
r3
r4
r5
'Resetting the program'
Possible solution
Connect the mains plug.
Do a check on the fuse box.
Open the water tap.
Close the door.
Start the appliance. Refer to section
'Starting the appliance'
Make sure that the water inlet hose
and the filters are not clogged.
Close the door.
Release the on/off button.
.
.
Publicité
