Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
LoRaWAN PULSE - Mode d'emploi / User guide version V1.6.1
•
Make sure that the seal is properly positioned on the base
Fastening clip
•
Clip the electronic board onto the casing's base. Make sure that the fastening clip is properly locked into the board's fitting.
•
Insert the upper part of the casing. Inside this part there are guide rails for the board. Make sure that the board is properly positioned
within these guides.
•
Once the board is in position, lower the upper cover and lock it onto the casing's base. Strong pressure will enable both parts to be clipped
Locking clips for the
upper casing
Fitting
Page
32
of 41
Publicité
Table des Matières
