JVC AV-27D304 Guide De L'utilisateur page 26

Initial Setup
Auto Tuner Setup
The auto tuner setup function is described on page 19 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the M
To AUTO TUNER SETUP
π †
è
To operate
è
To choose CABLE or AIR
To move to START
†
è
To start Auto Tuner Setup
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV.
You can add or delete channels from the line-up or prevent any unauthorized viewers from
watching any or all 181 channels.
Press the M
To CHANNEL SUMMARY
π †
è
To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an "¸". You can
delete channels from the scan by removing the "¸". If
any channels were missed during auto tuner setup and
you wish to add them, you may by placing an "¸" next
to the channel number.
To the SCAN column
π †
è
To include or delete from scan
Press the E
You can block access to a channel by activating the channel lock.
Press the M
To CHANNEL SUMMARY
π †
è
To operate
To the Lock Column (
π †
Press the Z
Press the E
26
button
ENU
button
ENU
button when finished
XIT
button
ENU
)
button to lock or unlock that channel
ERO
button when finished
XIT