Publicité
Les langues disponibles
Les langues disponibles
7 Install the AA battery as shown in the diagram below.
.
8. After removing the door, make sure the LP tank knob is turned to "OFF". Place the tank
in the tank seat so that it sits securely and is level. Tighten the tank thumb screw to secure
the tank.
a.
9. Connect the LP Gas Tank
Before connection, be sure there is no debris caught in the
collar of the LP gas tank, the regulator valve, the burner
tube, or the burner ports.
Connect the gas line to the tank by turning the connection
knob clockwise. Hand-tighten only.
Disconnect the LP Gas Tank
To disconnect the LP gas tank, make sure the valve on the
LP gas tank is completely closed.
Disconnect the connection knob by turning it counterclockwise
until it is detached from the valve.
ASSEMBLY INSTRUCTIONS
_
+
b.
10
Publicité
