MV Agusta DRAGSTER 800 RR 2018 Mode D'emploi page 165

Setting of "Custom" mapping
Press the "ENGINE MAP" button until selecting the
mapping "C" of the control unit ("Custom" mapping).
WARNING
The "Custom" mapping setting operations must
be performed when the the gear is in neutral and
the motorbike stationary with your feet on the
4
ground. Do not change the display while driving.
Press "SET" until "SETTING CUSTOM MAP" appears.
In order to adjust the "Custom" mapping parameters to
your driving requirements, perform the following opera-
tions.
NOTE: The "Custom" mapping can be defined
by mixing the Normal, Rain and Sport map-
ping characteristics when defining the fol-
lowing parameters.
Throttle control sensitivity: Press "OK" for less than
three seconds until "GAS SENSITIVITY" appears.
OPERATION
- 66 -
4