MV Agusta DRAGSTER 800 RR 2018 Mode D'emploi page 163

Once the full code has been entered, "CONFIRM
CODE" appears on the display. Press "OK" for over
three seconds to confirm the code.
4
If the entered code is recognised by the system,
"VALID CODE" appears. The dashboard display goes
back to "RUN". The engine may be started.
If the entered code is wrong, "NOT VALID CODE"
appears. The system will not let the engine start; the
display goes back to "IMMOBILIZER". Repeat the code
entry procedure from the start, taking care of setting all
the right digits shown on your MV Code Card. If the pro-
blem persists, contact a MV Agusta licensed service
centre.
OPERATION
- 64 -
4