4.4.1. Selecting the display functions
The following settings may be changed
on the display:
• "RUN" (Odometer)
• "SPEED LIMITER"
• "TC" (Traction control)
• "CHRONO" (Chronometer)
4
• "ABS" (Antilock braking system)
• "QUICK SHIFT"
• "CLOCK" (Clock)
To display the operating modes, press
"SET" for less than three seconds.
When pressed, the display shows all
modes in a sequence. Select the
desired mode.
OPERATION
WARNING
The operation must be performed while the engine is
not running, the gears are in neutral, the motorcycle
is stationary, and with the feet on the ground. Do not
set the display functions while riding, except where
otherwise indicated.
- 38 -
4