Franke FMY 908 BI WH CH Manuel D'utilisation page 9

2. USE
• The extractor hood has been designed
exclusively for domestic use to eliminate
kitchen smells.
• Never use the hood for purposes other
than for which it has been designed.
• Never leave high naked flames under
the hood when it is in operation.
• Adjust the flame intensity to direct it onto
the bottom of the pan only, making sure
that it does not engulf the sides.
• Deep fat fryers must be continuously
monitored during use: overheated oil
can burst into flames.
3. CARE AND CLEANING
- The sponge-like part of the filter can be
washed in the dishwasher at least once
every 4 months, or more frequently if use
is particularly intense. Operation is guar-
anteed for up to a maximum of 5 washes,
after which it must be replaced (W).
- The Grease filters must be cleaned
every 2 months of operation, or more
frequently for particularly heavy usage,
and can be washed in a dishwasher (Z).
• Clean the hood using a damp cloth and
a neutral liquid detergent.
4. CONTROLS
Warning: Do NOT force the control
dial to turn beyond its limit.
B0
When the dial is turned clockwise the speed
increases, passing from:
OFF-1-2-3-INTENSIVE (B1).
The base of the dial will become brighter as
the speed changes.
Turning the dial clockwise and holding it for about
2 sec. activates the DELAY function.
The motor and lights switch off automatically
after 10 min. When the DELAY function is active,
the base of the dial flashes.
This function cannot be activated if INTENSIVE
speed is active.
Press the dial briefly to turn the lights on/off at
maximum intensity (B2).
Press and hold the dial for approximately 2 sec.
to turn the lights on/off at intermediate level.
W
When the dial is turned anticlockwise the speed
decreases, passing from:
INTENSIVE-3-2-1-OFF (B0).
Turning the dial anticlockwise and holding it for
about 2 sec. switches the motor off.
5. LIGHTING
• For replacement contact technical support
("To purchase contact technical support").
B1
B2
9