Publicité
Les langues disponibles
Les langues disponibles
Checking the device status
◊ Press the CONTROL button briefly (< 2 seconds)
NO DISPLAY
STATUS
ALARM
Please refer to the instructions for use in case of any
Switching on
Press the CONTROL button and hold it down for more than
2 seconds until STATUS lights up green.
Switching off
Press the CONTROL button and hold it down for more than
5 seconds until both STATUS and ALARM indicators light up red.
If switching on/off is password-protected, the RISK LOGGER can
only be started up via the „MONILOG®Analyzer" software.
Remember to calibrate your device regularly. We are at
your disposal with our
The device is switched off or the battery is
empty
The device is ready to measure
An alarm limit value has been exceeded
deviating illustrations.
LONGLIFE
package.
EN
Publicité
