Advanced Bionics Naida CI M30 Mode D'emploi page 8

Use of the Naída CI M30 sound processor next to
•
or stacked with other equipment should be avoided
because it could result in improper operation (e.g.,
poor sound quality, cutouts in sound, delay in response
when making adjustments, or loss of lock). If such use is
necessary, the Naída CI M30 and the other equipment
should be observed to verify that they are operating
normally.
• Use of components, accessories, and cables other
than those specified in the Compatibility section of this
document could result in increased electromagnetic
emissions or decreased electromagnetic immunity of
this equipment and result in improper operation (e.g.,
poor sound quality, cutouts in sound, delay in response
when making adjustments, or loss of lock).
Portable RF communications equipment (including
•
devices such as antenna cables and external antennas)
should be used no closer than 12 inches (30 cm) to any
part of the Naída CI M30 sound processor, including the
headpiece cable. Decreased performance of the sound
processor, headpiece, or other accessories could result
(e.g., poor sound quality, cutouts in sound, delay in
response when making adjustments, or loss of lock).
• The Naída CI M30 sound processors and accessories
should be used in accordance with the electromagnetic
compatibility information provided in the Guidance and
Manufacturer's Declaration section of this document.
Although electromagnetic emissions of your
•
Naída CI M30 sound processor have been confirmed
within safe limits, some other devices could be sensitive
6