THOMSON THVC23120B Mode D'emploi page 32

INSTRUCTIONS TO INSTALLATION
 Metal Tube
1) Insert the metal tube to the main body until a click sound is heard.
2) Press the metal tube release button and remove the tube.
 Floor Brush Installation
1) Insert the motorized brush on the end of the tube until a click is
heard.
2) Press the motorized floor brush release button to remove the
motorized floor brush.
Note: The floor brush, long crevice nozzle, and 2 in 1 brush can be
directly connected to the main body or tube.
 Wall mount
Drywall
anchors
Tips: Choose location near power outlet. Locate point high
enough on wall to allow wand and power brush to hand freely.
Place wall mount against wall and use pencil to mark drill holes.
Drill holes (with 1/4" bit) and insert drywall anchors. Insert the
screws through the holes in the bracket and tighten until the
wall bracket is securely fastened.
EN-9
Screw