Philips sonicare Advance 400 Serie Mode D'emploi page 12

4235 020 00392 16-12-2005 08:51 Pagina 12
ENGLISH
12
C
C
C
C
C
4 Turn the screwdriver handle sideways, using twisting and prying
motions, to crack open the handle along its side seams.
5 Pull the 2 handle sections completely apart.
6 Insert the screwdriver underneath the electronic circuit board
in multiple places.
7 Twist and pry the electronic circuit board loose until it is
completely separated from the handle.
8 Pry the 2 AA-sized cylindrical nickel-cadmium batteries loose
by inserting the screwdriver on the sides of the two batteries
in the locations shown in the figure.