APPLICATION
This pump is used primarily as cellar pump.
When installed in a shaft, the pump provides
protection from flooding.
It is also used wherever water has to be moved
from one place to another, e.g. in the home,
agriculture, horticulture, plumbing and many
other applications.
It is not designed for commercial use.
WARNING! Read this manual
and general safety
instructions carefully before
using the appliance, for your
own safety. Your power tool
should only be passed on
together with these
Packing materials are no toys!
Children must not play with
Danger of suffocation!
GENERAL POWER TOOL
SAFETY WARNINGS
Read all safety warnings and all instructions.
Failure to follow all warnings and instructions
may result in electric shock, fire and/or serious
injury. Save all warnings and instructions for
future reference. The term "power tool" in the
warnings refers to your mains operated (corded)
power tool or battery operated (cordless) power
tool.
GB SUBMERGIBLE PUMP
instructions.
WARNING
plastic bags!
Caution
The appliance is not suitable for continuous
pump operation (e.g. continuous circulation in a
pond) or as a stationary installations (such as a
lifting device, fountain pump).
Caustic, slightly inflammable and other
explosive substances such as petrol, petroleum,
diluted nitrogen, greases, oils, salt water and
waste water from toilets as well as sludgy water
that has a slower flow capacity than water,
should not be transported using the pump. The
temperature of the transported fluids should not
exceed 35°C.
SAFETY INSTRUCTIONS
Danger of death
Violating these safety
instructions may result in death
through electrocution.
Check the power cord with mains plug
for damage before every use. If the
power cord is damaged, please arrange
immediately for the exchange by an authorized
customer service or a skilled electrician.
All electrical sockets should be fixed in
an area that is protected against floods.
Unsuitable extension cables can be
hazardous. Only use extension cables
outdoors which have been approved for
this purpose and labelled with a sufficient
cable cross-section.
The plug and coupling of the extension
cable used must be spray watertight.
Do not use the mains cable or the cable
of the level sensor to transport or fasten
the appliance.
To separate the machine from the mains, pull
the plug and not the power cord.
Do not scrape the power cord across sharp
edges and ensure that it does not get pressed.