Care And Cleaning; How To Remove: Shelf Supports - AEG BEK435E20M Notice D'utilisation

Masquer les pouces Voir aussi pour BEK435E20M:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28

12. CARE AND CLEANING

WARNING!
Refer to Safety chapters.
12.1 Notes on cleaning
Clean the front of the oven with a soft cloth with warm water and a mild detergent. Clean and
check the door gasket around the frame of the cavity.
Use a cleaning solution to clean metal surfaces.
Clean stains with a mild detergent.
Cleaning Agents
Clean the cavity after each use. Fat accumulation or other residue may cause fire.
Moisture can condense in the oven or on the door glass panels. To decrease the condensa‐
tion, let the oven work for 10 minutes before cooking. Do not store the food in the oven for
longer than 20 minutes. Dry the cavity with a soft cloth after each use.
Everyday Use
Clean all accessories after each use and let them dry. Use a soft cloth with warm water and
a mild detergent. Do not clean the accessories in a dishwasher.
Do not clean the non-stick accessories using abrasive cleaner or sharp-edged objects.
Accessories

12.2 How to remove: Shelf supports

Remove the shelf supports to clean the oven.
Step 1
Turn off the oven and wait until it is
cold.
Step 2
Pull the front of the shelf support
away from the side wall.
Step 3
Pull the rear end of the shelf support
away from the side wall and remove
it.
Step 4
Install the shelf supports in the oppo‐
site sequence.
22
ENGLISH
1
2

Publicité

Table des Matières
loading

Table des Matières