Publicité
Les langues disponibles
Les langues disponibles
Follow
all
special
on
packaging
and
transporting batteries by a third party.
Ensure that no batteries can come in
contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
batteries that are cracked or leaking.
Check with the forwarding company for
further advice.
KNOW YOUR PRODUCT
See page 86.
1. Insulated grasping surface
2. On / Off switch
3. Vacuum port door
4. Quick change hook-and-loop pad
5. Dust port
6. Battery port
7. Sandpaper
8. Vacuum adaptor
9. Operator's manual
10. Battery pack
11. Charger
MAINTENANCE
■
The
product
should
connected
to
when
assembling
adjustments, cleaning, performing
maintenance, or when the product is
not in use. Disconnecting the product
from the power supply will prevent
accidental starting that could cause
serious injury.
■
When servicing, use only original
manufacturer's replacement parts,
accessories and attachments. Use of
any other parts may create a hazard
or cause product damage.
4
Original Instructions
requirements
labelling
when
never
be
a
power
supply
parts,
making
■
Avoid using solvents when cleaning
plastic parts. Most plastics are
susceptible to various types of
commercial solvents and may be
damaged by their use. Use clean
cloths to remove dirt, carbon dust,
etc.
■
Do not at any time let brake fluids,
gasoline, petroleum-based products,
penetrating oils, etc., come in contact
with plastic parts. Chemicals can
damage, weaken or destroy plastic
which may result in serious personal
injury.
■
For greater safety and reliability, all
repairs should be performed by an
authorised service centre.
SYMBOLS
Safety alert
No-load speed
On
Off
Please read the instructions
carefully before starting the
machine.
European Conformity Mark
British Conformity Mark
Ukraine Conformity Mark
Publicité
