Konect multi80+ Mode D'emploi page 6

initiaL paraMEtEr SEt Up (USErS SEt Up)
As default this charger will be set to
typical user settings when it is connected
to a 12V battery for the first time.The
screen displays the following information
in sequence and the user can change the
parameter on each screen.
If you need to alter the parameter value in
the program,press"Start/Enter"key to make
it blink then change the value with"INC"or
"DEC"key. The value will be stored by
pressing"Start/Enter" key once.
6