Publicité
Liens rapides
Publicité
Manuels Connexes pour IBEX EXTRA CROSSBAR
Sommaire des Matières pour IBEX EXTRA CROSSBAR
- Page 1 IBEX ™ EXTRA CROSSBAR ASSEMBLY ASSEMBLY VIDEO...
- Page 2 Parts & Tools (1) IBEX™ Extra Crossbar (2) M8 x 22 (4) M8 x 12 (2) Crossbar Stiffener (6) M8 Washer (6) T-Nuts (1) 6mm Hex Key (1) 5mm Hex Key...
- Page 3 Begin the disassembly process by gently loosening the bolts that secure the crossbar connection and the crossbar stiffeners on one of your current IBEX crossbars. Slide the current crossbar to the center of the IBEXTM frame. Once in the desired location, securely fasten the Connection...
- Page 4 Crossbar Installation Gently loosen the Extra Crossbar Bolt housed within the orange-colored nut. Slide T-Nut into the Driver Side Upper T-Channel...
- Page 5 Slide T-Nut into the Passenger Side Upper T-Channel Align the Extra Crossbar with the driver side and install the M8 washer and M8 x 22 bolt into the T-Nut. Do not fully tighten at this stage.
- Page 6 Align the Extra Crossbar with the passenger side and install the M8 washer and M8 x 22 bolt into the T-Nut. Remember to not fully tighten at this stage. Verify that the distance between the openings of the T-Channels is...
- Page 7 Torque Extra Crossbar Connection Bolts to 20 Nm. Do not over-tighten.
- Page 8 IBEX Frame Stiffeners Insert (2) T-Nuts into the T-Channels on the IBEX frame and the Extra Crossbar by sliding them into place. Install the Stiffener, (2) M8 washers, and (2) M8 x 12 bolts into the T-Nuts. Repeat this process for the opposite side.
- Page 9 Extra Crossbar Tightening Apply a torque of 15 Nm to each bolt securing the Extra Crossbar Frame Stiffener. Do not over-tighten. Use a torque of 15 Nm to secure the orange nut in the Extra Crossbar. Do not over-tighten.
- Page 10 Warnings IBEX ™ WARNINGS • Follow instructions for proper assembly, installation and use. • Check tightness of all bolts and screws periodically. • Make sure rack is in working condition before each use. • Do not exceed the weight limits intended for this rack.
- Page 11 NO WORRIES LIMITED WARRANTY We stand behind our products, and our customer service reps are waiting to help you out if you have any problems with your product. Our limited warranty covers your purchase for life. You can review our limited warranty on our website or call customer service at the number below if you have questions or need a repair, replacement, refund, or a copy of the limited warranty.
- Page 12 1.877.822.5828 info@kuat.com kuat.com...