Publicité
Liens rapides
Publicité
Manuels Connexes pour IBEX PISTON SR MOUNT
Sommaire des Matières pour IBEX PISTON SR MOUNT
- Page 1 IBEX ™ PISTON SR MOUNT ® ASSEMBLY ASSEMBLY VIDEO...
- Page 2 Parts M8 x 16 Bolts (4) T-Nuts (4) PISTON SR Mounts ® Pedal Strap (1) 5mm Hex Key...
- Page 3 PISTON SR Mount Installation ® Insert (4) T-Nuts into the T-Nut channels located on both the upper and lower IBEX bed rails. Install the PISTON SR Mounts into the T-Nuts by securing them ® with two M8x16 bolts for each mount. Apply a torque of 29 Nm...
- Page 4 PISTON SR Installation ® Flip the PISTON SR over and place (4) short T-Nuts, included with ® the PISTON SR, into the T-Channel openings—two on each end. ® Align two on the left and two on the right to match the bolt holes on your PISTON SR Mounts.
- Page 5 SR user guide. ® Tightly loop provided Pedal Strap around pedal axle and PISTON SR pivot arm to secure crank arm. ® Failure to properly secure the Pedal Strap may result in the pedal causing damage to your IBEX or IBEX accessories.
- Page 6 ® WARNINGS • Follow instructions for proper assembly, installation and use. • Mounts are for attaching PISTON SR to the IBEX only. ® • Check tightness of all bolts and screws periodically. • Make sure rack is in working condition before each use.
- Page 7 NO WORRIES LIMITED WARRANTY We stand behind our products, and our customer service reps are waiting to help you out if you have any problems with your product. Our limited warranty covers your purchase for life. You can review our limited warranty on our website or call customer service at the number below if you have questions or need a repair, replacement, refund, or a copy of the limited warranty.
- Page 8 1.877.822.5828 info@kuat.com kuat.com...