Publicité
Liens rapides
Publicité
Manuels Connexes pour IBEX PISTON SR MOUNT
Sommaire des Matières pour IBEX PISTON SR MOUNT
- Page 1 IBEX ™ PISTON SR MOUNT ® ASSEMBLY ASSEMBLY VIDEO...
- Page 2 Parts M8 x 16 Bolts (4) T-Nuts (4) PISTON SR Mounts ® Pedal Strap (1) 5mm Hex Key...
- Page 3 PISTON SR Mount Installation ® Place (4) T-Nuts in upper and lower IBEX bed rail T-Nut channels. ™ Install PISTON SR Mounts into T-Nuts using (2) M8x16 bolts ® for each mount. Torque to 29 Nm. Do not overtighten.
- Page 4 PISTON SR Installation ® Turn your PISTON SR over and insert (4) short T-Nuts ® provided with the PISTON SR into middle channel slot. Align two ® on the left, and two on the right. These T-Nuts will align with the bolt holes on y our PISTON SR Mounts.
- Page 5 SR user guide. ® Tightly loop provided Pedal Strap around pedal axle and PISTON SR pivot arm to secure crank arm. ® Failure to properly secure the Pedal Strap may result in the pedal causing damage to your IBEX or IBEX accessories.
- Page 6 ® WARNINGS • Follow instructions for proper assembly, installation and use. • Mounts are for attaching PISTON SR to the IBEX only. ® • Check tightness of all bolts and screws periodically. • Make sure rack is in working condition before each use.
- Page 7 NO WORRIES LIMITED WARRANTY We stand behind our products, and our customer service reps are waiting to help you out if you have any problems with your product. Our limited warranty covers your purchase for life. You can review our limited warranty on our website or call customer service at the number below if you have questions or need a repair, replacement, refund, or a copy of the limited warranty.
- Page 8 1.877.822.5828 info@kuat.com kuat.com...