Publicité
PISTON
®
3
Flip the PISTON
the PISTON
Align two on the left and two on the right to match the bolt holes
on your PISTON
4
Fasten the PISTON
(4) M6 x 16 bolts provided with the PISTON
on the underside of each PISTON
of 29 Nm during the tightening process.
Do not over-tighten.
SR Installation
SR over and place (4) short T-Nuts, included with
®
SR, into the T-Channel openings—two on each end.
®
SR Mounts.
®
SR onto the T-Nuts by using the
®
SR. Place these bolts
®
SR Mount. Apply a torque
®
Publicité
