Publicité
Les langues disponibles
Les langues disponibles
C
LEANING THE BLADES
In the case of intensive use, clean the blades at least once a day.
▪ Remove the blades as described in § 3.5.
▪ Clean the inside of the blades with the brush supplied (Fig. 1-M).
▪ Lubricate the cutters (Fig. 4) and put the blades back on the equipment as
described in § 3.5.
Copyright © 2019 by C.A.R. SAS
July 2020 edition – Version 2
All rights reserved. Reproduction of all or part of this document, in any form
whatsoever, is prohibited unless C.A.R. SAS has given its prior written approval
thereto.
Due to ongoing research and development, the specifications of this product may be
modified at any time without notice.
To the best of our knowledge, the information in this guide is accurate.
Photographs are not contractually binding.
23
Publicité
