Pulsar PWP10 Guide D'utilisation page 11

Operating Instructions & Parts Manual
1 Inch Water Pump
Starting The Engine
5) Turn the engine switch to the ON position. The engine
Engine Switch
switch enables and disables the ignition system. The
engine switch must be on the ON position for the engine
to run. Turning the engine switch to the OFF position
stops the engine.
ON
6) Operate the Recoil Starter: Pull the starter grip lightly
Starter Grip
until you feel resistance, then pull briskly. Return the
starter grip gently. Pulling the starter grip operates the
recoil starter to crank the engine.
7) If the Choke lever has been moved to the Closed
Choke Lever
position to start the engine, gradually move it to the
Open position as the engine warms up.
Choke Lever To Open
Open
Close
11