Publicité
Les langues disponibles
Les langues disponibles
Switching on the oven
Indicator light
The indicator light comes on while the oven is
warming up. Once the set temperature has
been reached, the light goes out.
Type NF925
You use the function control knob to set the
temperature or settings. The temperature
range is continuous.
Symbol
Description
oven lighting
bottom heat
upper heat
grill
Remove from the oven everything which you
are not using to prepare the dish.
Slide the dish into the oven if it is not
necessary to pre-warm the oven. See the
temperature table to determine the height of
the ledge.
Oven lighting
The oven lighting will switch on. This is the
best setting for cleaning the oven.
Bottom heat
This function is advised for dishes of which
the bottom need good cooking. The bottom of
the dishes are thoroughly cooked.
Before the end of the cooking process is
reached (when there is still a quarter of the
cooking time left), turn the function knob to
fig. 7 - NF925
bottom heat. Turn the temperature knob to its
maximum setting. The dish will then be heated
mainly by the bottom element, but will
continue to brown on top.
Upper heat
This setting is suitable for a giving a short
extra burst of heat to soufflés, meringues,
etc., to thoroughly cook them. At the end of
the cooking process, turn the function knob to
the top-heat setting.
Grill
The dishes are heated by the radiation heat of
the combined grillelement. Flat pieces of
meat, chicken or other poultry may be grilled
directly on the grid shelf. This grill setting is
also suitable for toasting bread.
Publicité
