Publicité
Les langues disponibles
Les langues disponibles
Before using your appliance
Gashob
Burning in of the enamel
The burners cause the saucepan supports
I
to get extremely hot. In time the enamel on
the support points can burn in. This cannot
be prevented and is not covered by the
guarantee.
Burner caps
Check regularly whether the caps of the
I
burners are properly in position on the
burner depressions. Improper positioning
can make it difficult to light the burners,
give rise to an irregular gas flame, or
damage the burner caps.
Oven
Prepare for use
Remove the blue protective foil of the
I
stainless steel door.
I
Remove all accessories from the oven and
clean them thoroughly using a dish-
washing detergent. Switch on the closed,
empty oven at the maximum temperature
for about thirty minutes, after which the
grilling element should be switched on for
a period of fifteen minutes. Let the oven
cool off and clean it with warm water.
Please note:
When the oven is heated to a high
temperature for the first time, you will smell a
"new appliance" odour. This is to be
expected.
Timer clock (NF 925)
Use without timer clock
Turn the timer clock to
I
The oven can be used without timer clock
function.
Automatic switch off with the timer clock
function
The oven switches off automatically when the
cooking time has elapsed.
I
Select the temperature or setting require
by turning the knob to the right symbol.
Turn the timer knob clockwise all the way
I
to 120 minutes. This way you tighten the
spring.
Turn the timer knob back (anti-clockwise)
I
to the desired time.
The oven has been switched on and it gives a
signal when the cooking time has elapsed.
The oven then switches off automatically.
fig. 1
.
Publicité
