Pet Essentials 6101PGC Manuel De L'utilisateur page 5

FIG. 11
Installing the Gate Latch
1. Attach gate latch (L) to the latch side of the gate frame at the desired height. Tighten bolts until
latch is securely attached to frame. Slide the gate into position, leaving approximately 2" between
the door and the corner post. Make sure to space the gate latch and frame correctly so that the
latch has a snug fit, but can also be opened and closed smoothly. (FIG. 13).
2. Tighten the set screws on the gate that were left loose in earlier installation steps.
03/30/22
FIG. 12 FIG. 13
Page 5 of 10