DCU Tecnologic KIDS PRO Mode D'emploi page 18

ENG
5.2 Register and login in.
Creating a user account and login: follow the steps in the APP
to register and login in, select the language and location.
Attention: Use the parent email to sign up.
5.3 Pair with the device.
After registration, to pair the APP with the Smartwatch, scan
the QR code that will be found on the smartwatch: Setup > QR
Code > RegCode
Please note: the registration code is a 15-digit QR code, not the
barcode
After you have paired the Smartwatch, you will enter to the
main interface of the APP.
Tip: After your account is linked to the Smartwatch, you
will be the administrator, if other phones or accounts
wish to be linked to the watch, the account you're using
will receive a notification request for authorization.
PLEASE NOTE THAT: with the same email you can only create
one account in the APP, but you can connect more than 1 watch
to the account and the same watch can be associated with
several accounts (father, mother, etc.).
6. General Functions
• Location: GPS +AGPS+ LBS +WIFI Location real time on Map.
• Trace: Find the trace in APP.
• Safety area: Set fence (safety area) in the device (Max 3
fences), And notify you in APP when watch wearer reach or
out of the appointed area.
• Weather: Automatically update the weather of local region.
In primary page just slide from the bottom of screen to enter
the weather quickly.
• Contact: Setting up maximum 15 members of your friends or
relative in APP.
• Dial interface: Dial interface is supported. You can turn on or
off this function in switch settings of APP.
• SOS: 3 emergency contacts can be set. Press the SOS
BUTTON (The button on some models is the power button) for
5 more seconds and it will make an emergency call to the
appointed contacts in turns. If there is no one answering, it
will continue to dial twice in turns and stop.
18