Technical Specifications - Varan XM-120 Manuel D'utilisation

instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury.

Regularly clean the power tool's air vents. The motor's fan will draw the dust inside the housing and
excessive accumulation of powdered metal may cause electrical hazards.

Keep your work area clean and well lit. Cluttered worksites and dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquid,
gases, or dust. Power tools create sparks which may ignite the dust or fumes.

Don't use power tools with damaged cable. If cable is broken while working, don't tough the cable,
remove the plug from the socket at once. Otherwise may result in electric shock.

While working, two hands must hold the machine always, one-handed operation is not allowed.
Hands should not tough the rotary blades.
FEATURING
XM-120 Scouring machine is class Ⅱ handheld tool, designed and produced according to the standard of
GB3883.1.
It is with features of series motor driving, light weight, strong power, high efficiency, easy to operate, safe.
The machine is intended for scouring walls, ceiling or other surfaces of concrete, gravel, paint, plaster or
putty coated without using water.
The machine is with soft start, constant power control and overload protection.
Soft start could protect motor from excessive current shock, enhance motor lifetime.
Constant power control ensures power stable while machine work with different load.
Overload protection, machine will automatically shut down if machine is over load, prevent machine from
motor burnt
SPECIFICATIONS

TECHNICAL SPECIFICATIONS

Rated voltage
Current
Rated power
No-load frequency speed
Blade Width
Varan motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
230~240(V)
50（Hz）
1200(W)
9600(r/min)
φ125(mm)
T: 00352/26908036 – F: 00352/26908040
XM-120