Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PERSONAL SAFETY
•
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not
use tool while tired or under the influence of drugs, alcohol or medication. A moment of inattention
while operationg power tools may result in serious personal injury.
•
Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal
injuries.
•
Avoid accidental starting. Be sure switch is off before plugging in. Plugging in tools that have the
switch on invites accidents.
•
Remove adjusting keys or switches before turning the tool on. A wrench or a key that is left attached
to a rotating part of the tool may result in personal injury.
•
Do not overreach. Keep a proper footing and balance at all times. Proper footing and balance
enables better control of the tool in unexpected situations.
•
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can reduce dust-related hazards.
TOOL USE AND CARE
•
Do not force tool. Use the correct tool for your application. The correct tool will do the job better
and safer at the rate for which it is designed.
•
Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch
is dangerous and must be repaired.
•
Disconnect the plug from the power source before making any adjustments, changing accessories, or
storing the tool. Such as preventive safety measures reduce the risk of starting the tool accidentally.
•
Store idle tools out of reach of children and do not allow persons unfamiliar with the power tool or
theses instructions to operate the power tool. Tools are dangerous in the hands of untrained users.
•
Maintain tools with care. Properly maintained tools are less likely to bind and are easier to control.
•
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
•
Check for misalignment or bindling of moving parts, breakage of parts, and any other condition that
may affect the tools operation. If damaged, have the tool serviced before using. Many accidents are
caused by poorly maintained tools.
•
Use the power tool, accessories and blades etc.,in accordance with these instructions and in the
manner intended for the particular type of power tool, taking into account the working conditions
and the work to be performed. Use of the power tool for operations different from those intended
could result in a hazardous situation
SERVICE
Have your tool serviced by a qualified repair person using only identical replacement parts. This will ensure
that the safety of the power tool is maintained.
If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in
order to avoid a safety hazard.
ADDITIONAL SAFETY INSTRUCTIONS FOR SCOURING MACHINE
This power tool is intended to function as a scouring machine without water. Read all safety warnings,
Varan motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
T: 00352/26908036 – F: 00352/26908040
XM-120
Publicité
Table des Matières
