Publicité
Les langues disponibles
Les langues disponibles
•
Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
•
Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
•
The logs are fragile and should be handled with care.
WARNING
!
"PHAZER™ logs [and glowing embers], exclusive to Napoleon/Continental, provide a unique and realistic
•
Risk of fire!
glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a
•
Never obstruct the front opening of the appliance.
maximum glowing effect. Log colours may vary. During the initial use of the appliance, the colours will become
•
The front of the appliance must be finished with any non-combustible materials such as brick, marble, granite,
more uniform as colour pigments burn in during the heat-activated curing process."
etc., provided that these materials do not go below the specified dimension, as illustrated.
•
Do not strike, slam, or scratch. Do not operate appliance with glass removed, cracked, or scratched.
Insert only if
•
Facing and/or finishing material must never overhang into the appliance opening.
applicable ---->
•
The glass door assembly is designed to pivot forward when relieving excess pressure that might occur. Finishing
or other materials must not be located in the opening surrounding the door as this will interfere with the doors
ability to relieve pressure.
Log Number
1
10.1 log placement
2
3
WARNING
!
4
•
Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
5
with this appliance may result in property damage or personal injury.
6
•
Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
7
•
The logs are fragile and should be handled with care.
8
9
PHAZER
logs and glowing embers exclusive to Continental, provide a unique and realistic glowing effect that is dif-
TM
ferent in every installation. Take the time to carefully position the glowing embers for a maximum glowing effect. Log
10
colours may vary. During the initial use of the appliance, the colours will become more uniform as colour pigments
burn in during the heat activated curing process. Blocked burner ports can cause an incorrect flame pattern.
note:
Studs marked with an "X" must be
removed prior to installation.
Air Intake
IF APPLICABLE, INSERT DRAWING OF BURNER/SUPPORT WITH APPROPRIATE LA-
IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW.
Media Tray
If applicable, insert the following statement:
note:
Log numbers are located on the bottom or back of the logs.
Part Number
Media Barrier
BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.).
Stud C & D
Stud A & B
Burner Overview
3
10.0 finishing
Description
48.1
Burner
Stud E & F
Pilot Light
Cover
2
finishing
EN
Stud G
45
W415-4065 / B / 01.30.23
Publicité
