Télécharger Imprimer la page

Axis Q1808-LE Guide D'installation page 3

Masquer les pouces Voir aussi pour Q1808-LE:

Publicité

Axis Communications Inc.
300 Apollo Drive
Chelmsford, MA 01824
United States of America
Tel: +1 978 614 2000
Canada
This digital apparatus complies with
CAN ICES-3 (Class A). The product shall be
connected using a shielded network cable (STP) that
is properly grounded. Cet appareil numérique est
conforme à la norme CAN NMB-3 (classe A). Le produit
doit être connecté à l'aide d'un câble réseau blindé
(STP) qui est correctement mis à la terre.
Europe
This digital equipment fulfills the requirements for RF
emission according to the Class A limit of EN 55032.
The product shall be connected using a shielded
network cable (STP) that is properly grounded. Notice!
This is a Class A product. In a domestic environment
this product may cause RF interference, in which case
the user may be required to take adequate measures.
Australia/New Zealand
This digital equipment fulfills the requirements
for RF emission according to the Class A limit of
AS/NZS CISPR 32. The product shall be connected
using a shielded network cable (STP) that is properly
grounded. Notice! This is a Class A product. In a
domestic environment this product may cause RF
interference, in which case the user may be required
to take adequate measures.
Japan
この装置は、クラスA機器です。この装置を
住宅環境で使用すると電波妨害を引き起こす
ことがあります。この場合には使用者が適切
な対策を講ずるよう要求されることがありま
す。 VCCI ‒ A
本製品は、シールドネットワークケーブル
(STP)を使用して接続してください。また適切
に接地してください。
本製品は電気通信事業者(移動通信会社、固
定通信会社、インターネットプロバイダ等)
の通信回線(公衆無線 LAN を含む)に直接接
続することができません。本製品をインター
ネットに接続する場合は、必ずルータ等を経
由し接続してください。
Korea
이 기기는 업무용 환경에서 사용할 목적으로 적
합성평가를 받은 기기로서 가정용 환경에서 사
용하는 경우 전파간섭의 우려가 있습니다. 적절
히 접지된 STP (shielded twisted pair) 케이블을
사용하여 제품을 연결 하십시오.
Safety
This product complies with IEC/EN/UL 62368-1 ed. 3,
safety of audio/video and IT equipment for outdoor
use.
The product shall be grounded either through a
shielded network cable (STP) or other appropriate
method.
The power supply used with this product shall have
a rated output voltage within voltage range of
20-28 V DC, and a max current rating of 3.5 A.
The power supply used with this product shall fulfill
one of the following requirements:
Safety Extra Low Voltage (SELV) according to
CEC/NEC Class 2 source of supply as defined in the
Canadian Electrical Code, CSA C22.1 and National
Electrical Code, ANSI/NFPA 70
Class 1 electrical energy source (ES1) and
Class 2 power source (PS2) rated output
power limited to ≤100 W according to
IEC/EN/UL 62368-1
We recommend the use of Axis power supply T8007
24 V DC 1,5 A.
When used with Power over Ethernet (PoE), the
Power Sourcing Equipment (PSE) shall comply with
IEEE 802.3at/802.3bt and Limited Power Source (LPS)
according to annex Q of IEC/EN/UL 62368-1.
We recommend the use of Axis PoE+ midspans or Axis
PoE+ switches.
When connected in series with another camera, we
recommend using Axis PoE++ midspans or Axis PoE++
switches.
Photobiological safety
This product fulfills the requirements for
photobiological safety according to IEC/EN 62471 (risk
group 2).
Disposal and recycling
When this product has reached the end of its
useful life, dispose of it according to local laws and
regulations. For information about your nearest
designated collection point, contact your local
authority responsible for waste disposal. In accordance
with local legislation, penalties may be applicable for
incorrect disposal of this waste.
Europe
This symbol means that the product shall not be
disposed of together with household or commercial
waste. Directive 2012/19/EU on waste electrical
and electronic equipment (WEEE) is applicable in
the European Union member states. To prevent
potential harm to human health and the environment,
the product must be disposed of in an approved
and environmentally safe recycling process. For
information about your nearest designated collection
point, contact your local authority responsible for
waste disposal. Businesses should contact the product
supplier for information about how to dispose of this
product correctly.
This product complies with the requirements of
Directive 2011/65/EU and 2015/863 on the restriction
of the use of certain hazardous substances in electrical
and electronic equipment (RoHS).
China
This product complies with the requirements
of SJ/T 11364-2014, Marking for the restriction of
hazardous substances in electrical and electronic
products.

Publicité

loading