Publicité
Les langues disponibles
Les langues disponibles
EN
EN
Thank you for choosing an Elipson audio product.
Please read carefully the following information before using your new loudspeakers.
It contains tips to get the most of it and instructions for safety use.
We strongly recommend that you keep the packaging and this user manual for further use.
I. Content
II. Stereo setup
III. Connections
IV. Burn-in period
V. Specifications
WARNING
MAKE SURE TO READ THIS INSTRUCTION MANUAL
BEFORE TURNING THE POWER ON OR HOOKING UP
THIS LOUDSPEAKER.
Dear Customer,
SUMMARY
12
12
I. CONTENT
THE PACKAGING CONTAINS THE FOLLOWING ITEMS :
1. 2 loudspeakers
2. Port plug (Foam damp)
3. User Manual
13
II. STEREO SETUP
13
15
The Heritage XLS7 loudspeakers have been designed to reproduce all types of music as
accurately as possible, provided that a few rules should be followed to optimize perfor-
15
mance and achieve a realistic sound image. Ideally, the loudspeakers should be placed
16
symmetrically in front of the listening position to form an equilateral triangle.
The loudspeakers should be placed on a piece of furniture, or even better on an optional
dedicated stand, at the same distance from the rear wall and from the adjacent side
surfaces. Therefore, we recommend that you use suitable stands to place the tweeter at
ear level.
In order to optimize the setup of the loudspeakers in your listening room, we recommend
the following tests :
Above all, you should avoid positioning the loudspeakers in the corners of your room. The
result will be an artificial increase in the level of bass, masking the speed and details of this
range. Otherwise feel free to use the port plug
When inserting the port plug into the loudspeaker, do not push it too far. Otherwise the port
plug may fall into the loudspeaker.
First, adjust the spacing of the two loudspeakers in order to find the realistic balance be-
tween a wide sound image (wide apart loudspeakers) and a sound image respecting the
punctuality of the voices (close loudspeakers).
Secondly, move the loudspeakers away from the rear wall by steps of 10 cm to find the
balance between the depth of the sound image (far from the back wall) and the level of
the extreme low frequencies (close to the back wall).
Finally, adjust the loudspeakers orientation by turning them gradually toward the center
of the listening area. If you leave the loudspeakers parallel, you may want to bring them
closer together, if you orient them more than 30°, you may increase their spacing.
13
EN
Publicité
