Princess 535600 Mode D'emploi page 5

- Reparatie en service dient u uit te laten voeren door onze servicedienst. Gebruik het apparaat niet als
het beschadigd is of als het snoer beschadigd is, maar stuur het dan naar onze servicedienst.
- Zorg ervoor dat kinderen niet met dit apparaat spelen.
- Het is niet zonder gevaar om dit apparaat te laten gebruiken door kinderen of personen met een
geestelijke of lichamelijke handicap, of met te weinig ervaring of deskundigheid. De voor de veiligheid
van deze gebruikers verantwoordelijke persoon dient ze duidelijke instructies te geven voor of ze te
begeleiden bij het gebruik van dit apparaat.
- Dit apparaat is alleen geschikt voor huishoudelijk gebruik.
PRINCESS NICE PRICE CLIPPER
BEFORE USE
Before use first read these instructions for use and save them for future reference. Do not use clippers in
the bathroom or near a washbasin filled with water. Never try to grab an appliance that has fallen into
water, but pull the plug from the socket.
DETAILS
The clippers have a powerful swing motor, steel cutting blades, an adjustable cutting length and clip-on combs.
The clip-on combs are used to set different cutting lengths. This makes cutting and trimming so easy that
even as a home hairdresser you can achieve professional results. The cutting blades need not be oiled.
Accessories provided:
- brush
- comb
- hairdresser's scissors
- bottle of oil
- 4 clip-on combs:
# 1: for cutting length 3 mm.
# 2: for cutting length 6 mm.
# 3: for cutting length 9 mm.
# 4: for cutting length 12 mm.
DIRECTIONS FOR USE
First remove the protective cover from the cutting blades. Switch the clippers on with the slide switch.
Always switch off the CLIPPERS first after use and then pull the plug out of the socket. Put the protective
cover back again on the cutting blades.
Adjustable handle
By turning the handle, the cutting length can be adjusted between 1 and 3mm.
Clip-on combs
The clip-on combs can be clicked onto the cutting blades by placing them onto the cutting blades and
clicking them into position. To remove just click the clip-on combs back off.
Before you start cutting:
- Check the clippers. Make sure that there are no hairs or dirt on the clippers. Allow a drop of oil to run
over the teeth of the blade.
Switch the clippers on and check whether they work without problems.
- Drape a towel over the neck of the person whose hair you are going to cut.
- Make the person sit in such a way that the head is at eye-level for you. This ensures that
you can see well enough and that you can work better. If necessary, use books or cus-
hions to make the person sit higher.
- Comb the hair first, so that it is not tangled. Then hold the clippers as comfortably as
possible.
- Relax and work with precision. Only use short tracks. Do not finish the side or back
straightaway, but work gradually over the whole head.
- It is better to take off a small part at a time. After all, you can always take off more later.
- Before you start and while you are working on it, regularly comb the hair back in the
style desired.
- Use the clippers only on dry hair.
ART. 535600
5