Basic Operation; Power On/Off; Connect It To Your Other Equipment - Access Virus TI Série Guide De Démarrage Rapide

BASIC OPERATION

Basic Operation
The following is intended as a walkthrough guide to show you how simple it is to use the Virus TI. Please
read through it carefully, with the Virus in front of you.

Power On/Off

Plug the supplied power adaptor into the mains, and connect it to the POWER socket on the rear of the
Virus TI. The first time you do this, the unit should power up straight away. If you unplug the mains when the
Virus is in standby, it will still be in standby when you reconnect it.
Press both the TRANSPOSE buttons together to bring the Virus out of standby. Please wait for a few sec-
onds while the Virus boots the operating system. To return it to standby at any time, press and hold the
TRANSPOSE buttons for approx. 3 seconds.

Connect it to your other equipment

• USB
Important: You must install the TI Software and drivers before connecting the Virus to your computer via
USB.
To install: Go to www.access-music.de/start/ and download the latest build of the Virus TI installer package
for your chosen computer platform.
Once downloaded, extract the archive and run the installer. Follow the on screen instructions carefully, and
connect the USB cable when told to do so.
Connect the USB port on the Virus to a dedicated port on your computer using the cable provided or one
similar. DO NOT USE A HUB! Sorry to have to shout, but the importance of this cannot be overstated - the
Virus needs a USB port all of its own if the large amounts of data involved are to flow freely!
The firmware of the Virus TI will be updated automatically as part of the installation process.