Wall Mounting; Charging Process - HAEGER WET & DRY Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

This appliance is not intended for use by any person (including children) with
reduced physical, sensory or mental capabilities, or lacking experience and
knowledge, unless they have been given supervision or instruction
concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
No responsibility will be accepted if damage results from improper use, or if
these instructions are not complied with.
This appliance is only intended for domestic use and not for commercial
applications.
In order to comply with safety regulations and to avoid hazards, repairs of
electrical appliances must be carried out by qualified personnel, including
the replacement of the power cord.

Wall Mounting

The wall bracket is designed for storing the appliance and also serves as a
charging unit.
Mount the wall bracket vertically, near a wall socket, using the screws provided
with the appliance. The two lugs on the bracket must face upwards.
When mounting the bracket, ensure that the power cord leads through the
opening on the lower bracket rim, and that it is not jammed at any point.
The crevice tool can be stored on the right side of the bracket and the rubber
nozzle on the left side of the bracket.

Charging Process

Before using the vacuum cleaner for the first time, the battery must be charged
for a period of approximately 16 hours.
- Insert the adapter into a wall socket.
- Place the vacuum cleaner in the wall bracket. The charging process begins
automatically and is shown by the charge indicator.
- This appliance can remain on charge indefinitely without damage or
danger and is therefore fully charged and ready for use at all times.
- Whilst charging, the adapter will become warm. This is perfectly normal and
safe and does not indicate a malfunction of any kind.
- If the vacuum cleaner is not being used for a long period of time, the
capacity of the battery may decrease by a certain amount. However, full
capacity will be restored after several charge/discharge cycles.
Instructions for use
English
2

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wet & dry pv-40b.001aWet & dry pv-40g.002a

Table des Matières