Bosch SHX3AR Série Notice D'utilisation page 28

en-us Operating the Dishwasher
Intensive drying
The final rinse uses a higher
temperature which improves the
drying result. The cycle time may
increase slightly. (Caution if utensils
are delicate!)
You can turn this feature on or off.
Open the door.
1.
Switch on ON/OFF switch (.
2.
Hold down button > P
3.
and press START button h
until the clean indicator )" and
the sanitized indicator lights `
flash.
Release buttons.
4.
The displays )" and ` flash.
To change the setting:
Press button < H until the
1.
display # is lit (Intensive drying
on).
Press START button h.
2.
The displays go out. The setting is
saved.
Close the door.
3.
Setting the volume for the
end of cycle beep
The volume level for the end of cycle
beep can be set in 4 levels.
Accordingly 0, 1, 2 or 3 displays
are lit.
Factory setting: Medium.
Open the door.
1.
Switch on ON/OFF switch .
2.
Hold down button > P
3.
and press START button h
until the clean indicator )" and
the sanitized indicator lights `
flash.
Release buttons.
4.
Keep pressing button > until the
5.
indicators for rinse aid refill, clean
and santized flash.
The displays A and B are lit
(= Setting medium).
28
To change the setting:
Press the button < until
1.
the required setting has been
selected. Display A = low, Display
A, B and C = High. No display =
off.
Press START button.
2.
The displays and go out and
the selected setting is saved.
Close the door.
3.