emerio HP-108922.1 Mode D'emploi page 5

HP-108922.1
1. Hotplate
2. Indicator light
3. Adjustable temperature control dial
HOW TO USE YOUR HOT PLATE
Before using your hot plate for the first time, turn the hot plate to the highest setting (position 5) for 3 to 5
minutes to protect the coating. This should be done when there is no cooking utensil on the hot plate.
1. Put the hotplate on a flat, dry and heat resistant surface.
2. Turn temperature control dial to "
3. Put the plug into a suitable power outlet.
4. Turn the control dial to the desired setting. The unit will cycle on and off to maintain the selected
temperature.
5. The indication light at the front of the appliance will turn off when the hot plate reaches the selected
temperature, and the procedure of the heating will stop and recycle to maintain the temperature.
6. The heating element will begin to heat immediately. Do not touch the metal surfaces while in use, these parts
will become hot.
7. After use, unplug the power cord from wall outlet and allow it to cool down completely.
To keep food warm:

Turn the knob to "2" to maintain food at a constant warm temperature.

Turn the knob to "
down.
CAUTION
Do not use pans that are unstable and easily tipped. Use flat-bottom pans to insure full contact with the hotplate
for maximum heat efficiency.
For long-life performance, avoid dropping any items onto the hotplate.
When use this hotplate for the first time, there are some smoke, it is normal and safe.
Do not use glass containers!
HOW TO CARE FOR YOUR HOTPLATE
Always unplug the unit and allow to cool before cleaning. Never immerse in water.
Clean hotplate with a soft, damp cloth or a non-abrasive cleaner. Wipe dry.
SAVE THESE INSTRUCTIONS
1. This appliance is for household use only.
" (off).
" (off) and food will stay warm for up to 30 minutes as the hotplate gradually cools
- 4 -
EN