DELTA DORE Tybox 5150 Guide De Démarrage Rapide page 10

USE
1. Description
D E
A
B
mode
C
2. Consultation or modification of temperatures
1
mode
x2
3. Open window detection
If you have paired a motion detector with your installation.
If the window is open, the display shows "--" after 10 seconds, alternating with OPEn.
Depending on the current mode:
- the heating is in frost protection mode (10°C),
- the air conditioning is off.
4. Operation with the Tydom application
Your RF6200 receiver can be associated using the TYDOM application
Fonctionnalités
Programming
Setting the temperatures
Pre-heat function
Absence mode / Heat mode / Air
conditioning mode
Deactivating the system
F G
Temperature display
A
Select the mode
B
Adjustment buttons
C
Request in progress
D
2
mode mode
2
mode mode
(temperatures programmed in the app: special events, overrides,
Your equipment automatically determines the start-up time in order
to reach the temperature at the programmed time.
❶ Press any button to activate the display screen.
To switch from Heating (
twice.
The current mode is displayed:
ON = Thermostat on, OFF = thermostat off (frost protection
at 10°C in heating mode).
To switch from one mode to another, press mode.
❷ From ON mode, wait a few seconds to display the set-
point temperature and change it using + or -.
Validation after 2 seconds if no buttons are pressed.
Via l'application Tydom
Yes
Yes
scenario)
Yes
Yes
Yes
Heat mode
E
Air conditioning mode
F
Battery level indicator
G
) to Cooling ( ), press mode
8