König Electronic HAV-TR900 Serie Mode D'emploi page 10

Using the AM/FM Radio
Switching to AM/FM mode
If the DAB+ digital radio is in DAB mode,
press the desired frequency band button
(AM or FM). You may hear background noise
as no station has been tuned in. The display
looks like the image shown below.
Tuning the radio
To tune into a radio broadcast/station turn
the tuning control left or right until the pointer
is aligned with the desired frequency
markings on the tuning dial (see below).
When the pointer is horizontal you have
reached either the start or end of the
frequency range. Do not attempt to force the
dial further in the same direction.
Volume dial
When the DAB+ digital radio is switched on,
either turn the volume dial right to increase
the volume, or left to decrease the volume.
Tone dial
The tone dial is used to alter the audio output
of the DAB+ digital radio between a high
(treble) and low (bass) frequency range.
Turn the tuning control right to enhance the
high frequency (treble) content of the sound
output.
Turn the tuning control left to enhance the low
frequency (bass) content of the sound output.
Using aux in
The signal from another home entertainment
system can be connected to the digital radio
via 3.5 mm aux in socket on the right hand
side of the digital radio.
You will require a stereo cable with
connectors which match the sockets on your
other audio device.
Adjust the desired volume level by tuning the
volume control of the digital radio.
10