Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Introduction
The Steinberg Systems Price Computing Scale is Low Cost Highly accurate measuring
equipment most suitable for Super markets, Grocery Stores and other retail outlets.
This scale is made using Highly accurate and precise sensors. It has a capacity to store
up to 7 unit prices and 99 accumulation memory. It is a versatile machine; because it
also runs on rechargeable battery in case of lack of mains power. The scale will also
automatically switched off when it is in non-use condition; in order to save power.
Features
•
Specifications:600g*2g,3kg*1g,6kg*2g,15kg*5g,30kg*10g
•
Precision:1/3000F.S
•
AC 220v or 110v and bulit-in Rechargeable battery
•
Storage up to 7 unit prices
•
Accumulate operation (0-99)
•
Account function, do memory recall and memory clear one time
•
Auto shut off function to save power
EN
•
Display windows: Weight Window: 5 digits
Unit Price Window: 5digits
Total Price Window: 6 digits
Description
Key Description
Each of the keys are shown and described for you.
ZERO
The ZERO key zeroes the scale
TARE
The TARE key subtracts tare values and changes the scale from
gross mode (no tare) to net mode
M1 to M7
Stores unit price value at 7 different locations
C
The C key is used for canceling the memorized data
0~9
The NUMERIC key (0~9) is used for setting unit price data
•
DECIMAL POINT key is used for set the decimal position of unit
price
display backlight adjustment
10
Display Description
Display Indicators
1.
Tare indicator: The TARE LED is located on the left side below the Weight Win-
dow.
2.
Zero indicator: The ZERO LED is located on the right side below the Weight
Window.
3.
Low Battery Indicator: Low Battery Indicator is located below the Unit Price
Window.
4.
AC power indicator: AC Power LED/LCD is located below the Total Price Win-
dow.
Operation
General Instruction
1.
When battery goes low, the "Low Battery" indicator will be turned on automati-
cally. It is the time to charge the battery with the AC power.
2.
Allow the scale to warm-up for 10 minutes after switching on the power, for
better results.
Basic Operation
1. Zero the scale
When there is no item on the scale but reading is not zero, press the ZERO key
to turn on ZERO indicator.
2. Weighing
Ensure that scale is in ZERO position and ZERO indicator is glowing; place an
item for weighing on the pan. The Weight Window will display the weight of the
item.
3. Tare
Put container on the platter, once the weight reading is stable, press the TARE
key, the TARE indicator will be on and the container's weight will be deducted.
When it is time to clear the TARE, take off the container, and press TARE key
again.
11
EN
Publicité
Table des Matières
