1. Clean the inside of the appliance after every use. Use a damp cloth.
Note:
You can remove the guide racks to easily clean the inside. Refer to section
racks
.
2. In case of heavy dirt, clean the inside of the appliance with warm water and a mild cleaning agent. Thoroughly
rinse and dry the inside after cleaning.
3. Clean the accessories. Use warm water and a mild cleaning agent. Dry the accessories after cleaning.
4. Clean the outside of the appliance. Use a damp cloth or sponge.
5. In case of heavy dirt, clean the outside of the appliance with a mild detergent.
6. If necessary, you can remove bad smells from the appliance:
a. Place a cup of water with a few drops of lemon juice in the appliance. Make sure that you also place a
(plastic) spoon in the cup to avoid delayed eruptive boiling.
b. Use the microwave function at the highest power setting for 1 to 2 minutes. Refer to section
microwave function
REMOVING THE GUIDE RACKS
1. Remove the clamping bushes (A).
2. Remove the guide racks (B).
3. After cleaning, install the guide racks again. Refer to section
7
Extra information
MATERIALS SUITABLE FOR USE IN THE APPLIANCE
Material
Aluminium foil
Paper
Cling film
Aluminium tray
Microwave dishes
Heatproof plastic
Unglazed pottery
Metal cooking utensils
Ovenproof glass and ceramics
Normal glass
Metalic twists
Plate with metalic decoration
Mercury thermometer
Closed jar
Bottle with a narrow neck
Roasting bags
(*) By covering thinner parts of foods (such as chicken legs), you prevent them from cooking too quickly.
(**) Use undecorated kitchen paper to cover food and to absorb grease.
(***) Remove the lid and make sure that the jar is not heated too long. The jar may break.
.
Installing the guide racks
Suitable
Yes (*)
Yes (**)
Yes
No
Yes
Yes
No
No
Yes
Yes
No
No
No
No (***)
No
Yes
Removing the guide
Using the
(Figure 9)
.
English
•
43