Publicité
Les langues disponibles
Les langues disponibles
4.4 Test Strip
Run water through
the tap (1min.)
1
minute
NOTE: The factory hardness level setting is "3". If the water is well water or has a hardness
level above 90 dF, we recommend that you use filter and refinement devices.
4.5 Water Hardness Table
Level
German dH
1
0-5
2
6-11
3
12-17
4
18-22
5
23-31
6
32-50
4.6 Water Softener System
The dishwasher is equipped with a water softener which reduces the hardness in the
mains water supply. To find out the hardness level of your tap water, contact your water
company or use a test strip (if available).
4.7 Setting
In order to change the salt level, follow the below steps:
•
Open the door of the machine.
•
Turn on the machine, and press the Programme button as soon as the machine is
turned on.
•
Hold down the Programme button until all leds blink once.
•
The machine will display the last setting.
•
Set the level by pressing the Programme button.
•
Switch off the machine to save the setting.
Keep the strip in
Shake the strip.
the water (1sec)
1
second
French dF
British dE
0-9
10-20
21-30
31-40
41-55
56-90
Wait (1min.)
minute
0-6
7-14
15-21
22-28
29-39
40-63
EN - 14
Set the hardness level of
your machine.
1
2
3
4
1
5
6
Indicator
P1-9h LEDs are on.
P2-9h LEDs are on.
1/2-9h LEDs are on.
3h-9h LEDs are on.
6h-9h LEDs are on.
P1-6h-9h LEDs are on.
Publicité
