Haier HC61F Guide De L'utilisateur page 11

English
10. Align the pin of the top hinge with top hole on the left
side of the door and push into place. Replace the screws in the
upper hinge bracket but do not tighten all the way. (see fig. # 2)
11. Make sure the door closes easily but forms a tight seal.
Adjust the door as needed. Once you are satisfied with the door
alignment, completely tighten the upper door hinge screws.
12. Replace the hinge cover, insert the screw and
tighten completely. (see fig. # 2)
13. Remove the screw hole plugs from the opposite side. Place the plugs in
the screw holes on the side from which the handle was removed.
Align the screw holes on the handle with those on the door trim. Using
a Phillips Head Screwdriver insert and tighten the 2 screws. (see fig.
#1)
14. If the door does not close properly, refer to the
section titled "Door Alignment".
lower hinge bracket
fig. # 5
9
All manuals and user guides at all-guides.com
spacet
fig. # 4
door pin
lower hinge support
lower hinge