Publicité
Les langues disponibles
Les langues disponibles
Tools and Materials
Tape Measure
Safety Glasses
Painter's Tape
Saw
Level
Clamps
Construction Adhesive
Silicone Sealant
Suitable Support Framing Material [1-1/4" (32 mm) Max
Thickness]
Screws
Important Information
CAUTION: Risk of personal injury or property damage.
Cast iron sinks are heavy. Get help when lifting or moving.
IMPORTANT! Before beginning this installation, refer to the
"Roughing-In" section for cabinet dimensional requirements.
IMPORTANT! Before beginning this installation, cabinet must be
installed, secured, plumb, and level.
IMPORTANT! Long screws may damage adjacent cabinets. Ensure
the screws are long enough to secure the support framing, but short
enough not to extend through the inner walls of the adjacent
cabinets.
Due to the nature of undercounter installations, Kohler Co.
recommends that undercounter sink installations be performed by
trained and experienced installers.
Use proper fasteners and techniques to ensure that the frame will
support a minimum of 300 lbs (136 kg). Locate the fasteners for
easy access in the event the sink needs to be removed.
For K-6488 Only: This sink is intended for installation into a
standard 36" base cabinet.
For ease of installation, install the strainer assemblies to the sink
prior to installing the sink.
Inspect the drain and supply tubing; replace if necessary.
Observe all local plumbing and building codes.
1159655-2-B
2
Kohler Co.
Publicité
