Noaton 11055P Mode D'emploi page 27

4 Remote control
The remote control does not require pairing so you may use it immediately upon installing the fan. Because
it is infrared, you can control multiple fans of the same model at once with a single remote control,
provided that they are within its range.
Given the nature of the infrared signal, the controlled fan must be ideally up to 4 m away from the remote
control. If the distance is longer, the signal may be attenuated or lost. It is also necessary to ensure that
there are no obstacles between the remote control and the fan and that the remote control points its
upper end (where there is the IR diode) directly to the fan. This is the only way to ensure trouble-free
operation and the maximum user experience with this fan.
4.1 Description of individual remote control functions
Lighting on Lighting on
Lighting intensity increase
Colour temperature control
Colour temperature control
Low speed of the fan
Timer (1 hour)
Timer (1 hour)
Fan stop
EN
27
Lighting off
Cyclic light mode switching
Colour temperature control
Lighting intensity decrease
Medium speed of the fan
Hgh speed of the fan High speed of the fan
Timer (2 hour)